- ET7428 1Ω Dual SPDT Negative Signal Handing Analog Switch
- ET7222 High-Speed USB 2.0(480Mbps) Switch
- ET5228H 0.6Ω Dual SPDT Negative Signal Handing Analog Switch
- ET5223 0.5Ω Dual SPDT Analog Switch
- HTR6916 共阴极16x9阵列LED 驱动器
- HTR7198(S), HTR7144(S) 带自动呼吸功能的18x
- PL62010 集成升降压控制器及双向PD3.0等多种快
- RY6050-ADJ Series 500mA Adjustable High-Speed Low Power LDO
- RY6050 Series 500mA High PSRR, Low Noise, Low Power LDO
- RY6313 40V 150mA Low Power LDO
- RY6031 300mA High PSRR, Low Noise, Low Power LDO
- RY8337C 36V 3A 500KHz Synchronous Step-Down Regulator
- RY8337B 30V 3A 500KHz Synchronous Step-Down Regulator
- RY8337 38V 3.3A 500KHz Synchronous Step-Down Regulator
TDA7492PE 2X45W BTL D类音频放大器
The TDA7492PE is a dual BTL class-D audio amplifier with single power supply designed for home audio applications. The device is housed in a 36-pin PowerSSO package with exposed pad down (EPD) to facilitate power dissipation through a properly designed PCB area underneath the TDA7492PE.
Features
Wide-range single-supply operation (7 - 26 V) • Possible output configurations: – 2 x PBTL – 1 x Parallel BTL • BTL output capabilities (VCC = 22 V): – 44 W + 44 W, 4 Ω, THD 1% – 57 W + 57 W, 4 Ω, THD 10% – 32 W + 32 W, 6 Ω, THD 1% – 41 W + 41 W, 6 Ω, THD 10% – 25 W + 25 W, 8 Ω, THD 1% – 32 W + 32 W, 8 Ω, THD 10% • Parallel BTL output capabilities (VCC = 22 V): – 70 W, 3 Ω, THD 1% – 90 W, 3 Ω, THD 10% • High efficiency • Four selectable, fixed-gain settings of nominally 20.8 dB, 26.8 dB, 30 dB and 32.8 dB • Differential inputs minimize common-mode noise • Standby, mute and play operating modes • Short-circuit protection • Output power limited by PLIMIT function • Detection of shorted output pins during startup • Thermal overload protection • ECOPACK® environmentally friendly package
