产品分类/ Products
- ET7428 1Ω Dual SPDT Negative Signal Handing Analog Switch
- ET7222 High-Speed USB 2.0(480Mbps) Switch
- ET5228H 0.6Ω Dual SPDT Negative Signal Handing Analog Switch
- ET5223 0.5Ω Dual SPDT Analog Switch
- HTR6916 共阴极16x9阵列LED 驱动器
- HTR7198(S), HTR7144(S) 带自动呼吸功能的18x
- PL62010 集成升降压控制器及双向PD3.0等多种快
- RY6050-ADJ Series 500mA Adjustable High-Speed Low Power LDO
- RY6050 Series 500mA High PSRR, Low Noise, Low Power LDO
- RY6313 40V 150mA Low Power LDO
- RY6031 300mA High PSRR, Low Noise, Low Power LDO
- RY8337C 36V 3A 500KHz Synchronous Step-Down Regulator
- RY8337B 30V 3A 500KHz Synchronous Step-Down Regulator
- RY8337 38V 3.3A 500KHz Synchronous Step-Down Regulator
模拟开关芯片
产品名称：ET7222 High-Speed USB 2.0(480Mbps) Switch
型号： ET7222
产片介绍：General Description The ET7222 is a 2CH single-pole double-throw (SPDT) switches Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed
产片介绍：General Description The ET7222 is a 2CH single-pole double-throw (SPDT) switches Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed
┄┄┄详细介绍┄┄┄
General Description
The ET7222 is a 2CH single-pole/double-throw (SPDT) switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed differential signals with good signal integrity.
Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Industry-leading advantages include a propagation delay of less than 250 ps, resulting from its low channel resistance and low I/O capacitance. Their high channel-to-channel crosstalk rejection results in minimal noise interference. Their bandwidth is wide enough to pass High-Speed USB 2.0 differential signals (480 Mb/s).
ET7222 is offered in a QFN10L and MSOP10 package.
Features
● RON is typically 6.0 Ω @ VCC = 3.3 V
● Low Bit-to-Bit skew is typically 50 ps
● Low crosstalk is typical -37 dB @ 250 MHz
● Low current consumption is 1.0 µA typical
● Near-zero propagation delay is typical 250 ps
● Channel on-capacitance is 4.0 pF typical
● VCC Operating Range from 1.65 V to 4.5 V
● ≥ 750 MHz bandwidth (or data frequency)
● Part No. and package
Applications
● Differential Signal Data Routing
● USB 2.0 Signal Routing
Analog Symbol
Test Circuit and Waveform
Test Circuit and Waveform(Continued)
Typical Performance Curves
TA = +25 °C, Unless Otherwise Specified
上一篇：ET5228H 0.6Ω Dual SPDT Negative Signal Handing Analog Switch
下一篇：ET7428 1Ω Dual SPDT Negative Signal Handing Analog Switch
