- HTD5832C 内置译码器的 2.5A 低噪声步进电机驱动芯片
- NS6119/A 100V 输入 1.5A 输出异步降压稳压器
- PL3050 20V, 10A, Synchronous Boost Conv
- HTN7922,HTN7921 4.0V~30V输入,2A/1.2A同步降压变换器
- HTC6221高效异步升压型1.2A双节锂电池充电器
- HTN78A5 6V~100V输入,5A实地异步降压变换器
- HTR7072 带自动呼吸功能的6x12阵列LED 驱动器
- HTR7054 带自动呼吸功能的6x9阵列LED 驱动器
- HTR7108 带自动呼吸功能的9x12阵列LED 驱动器
- HTR7036 带自动呼吸功能的3x12阵列LED 驱动器
- NS2160H 单/双节锂电池充电管理 IC
- NS2156E 1.5A 线性锂离子电池充电管理 IC
- NS4190X 系列 单声道 AB 类音频功率放大器
- NS8003 单声道 AB 类音频功率放大器
产片介绍:一 概述; PL5500 is a synchronous 4-switch bidirectional Buck-Boost controller capable of regulatingtheoutput voltage at above or below the input voltage PL5
┄┄┄详细介绍┄┄┄
一 概述;
PL5500 is a synchronous 4-switch bidirectional Buck-Boost controller capable of regulatingtheoutput voltage at above or below the input voltage. PL5500 operates over a wide input voltage rangeof 3.6 V to 32 V (36 V maximum) to support a varietyof applications. PL5500 can operate at charger modefor 1, 2, 3, 4, 5 and 6 cells battery charge. PL5500 employs Constant ON time control inbuck, boost and buck-boost operation modes for superior load and line regulation. The switching frequencycould be set to 150kHz, 300kHz, 600kHz or 1200kHzbased on different resistor value between FREQpinand GND pin. The device also featuresaprogrammable soft-start function and offers all kindsof protection features including cycle-by-cycle current limiting, input under voltage lockout (UVLO), output over voltage protection (OVP), input Over VoltageProtection, thermal shutdown and output short protection etc. VADJ, IADJ pins are used to programoutput VBUSvoltage and output current limit at battery dischargingmode when OTG is high, which makes PL5500anexcellent option for USB Power Delivery (PD) application. PL5500 provides voltage control loop, constant current loop, thermal regulation loop, batterytemperature sensing, which makes it a perfect solution for batter charge management.
二 特性
Bidirectional single Inductor Buck-Boost Controller for Step-Up/Step-Down DC/DC Conversion and battery charge management
Bidirectional buck-boost operation to support battery charging and discharging using OTG signal
Dynamical programming of input current, Output current and Output voltage using PWM signal or analog signal
1 Cell to 6 Cells battery charge management
2V to 32 V wide output range
Comprehensive protection features including Output Short Protection (OSP), Cycle-by-Cycle input and output Peak Current Limit, thermal regulation, thermal shutdown, input UVLO, input OVP, output OVP etc.
Adjustable Switching Frequency using resistor
Frequency dithering for good EMI performance
Integrated 2-A MOSFET Gate Drivers
Input or Output Average Current Limiting with stable CC loop
Available in QFN4x4-32 Package
三 应用
Automotive Start-Stop Systems Backup Battery and Super capacitor Charging Industrial PC Power Supplies USB Power Delivery

上一篇:第一页
下一篇:PL5501High Efficiency 4-Switch Buck-Boost Controller
